You are currently viewing Flax Seed Wrap

Flax Seed Wrap

Recipe Benefits:

  1. Vegan (egg-free, dairy-free)
  2. Gluten-free
  3. Oil-free
  4. Keto-friendly
  5. Easy to make
  6. 2 ingredients


Ingredients: (for each wrap)

  • 2 tablespoons of crushed flaxseed
  • Pinch of salt
  • 2 tablespoons of water

Instructions:

  1. In a food processor or clean coffee grinder, grind the flaxseed into a very fine flour. This is a very important step, do not skip it.
  2. In a pan, whisk together the flaxseed and salt. Add the water, stirring until completely combined (the dough will look thick and somewhat gooey).
  3. Bake in the preheated oven for 5 to 10 minutes until risen.

This Post Has 129 Comments

  1. suba.me

    u1700 arΔ±za kodu Aayan Hutton u0073 arΔ±za kodu Avneet Nairn u0001 arΔ±za kodu Isaac Hawkins u arΔ±za kodlarΔ± Aman Parkes arΔ±za kodlarΔ± vw

  2. א׀שר ΧœΧ”Χ–ΧžΧ™ΧŸ Χ“Χ™Χ¨Χ•Χͺ Χ“Χ™Χ‘Χ§Χ¨Χ˜Χ™Χ•Χͺ Χ‘Χ‘Χͺ ים Χ›Χ“Χ™
    ΧœΧ”Χ™Χ©ΧΧ¨ קרובים ΧœΧ¨Χ—Χ•Χ‘Χ•Χͺ הבואנים של Χ‘ΧœΧ€Χ•Χ¨, Χ™Χ•Χ‘Χ€Χ˜Χœ, Χ“Χ¨Χš Χ‘ΧŸ Χ’Χ•Χ¨Χ™Χ•ΧŸ או Χ©Χ“Χ¨Χ•Χͺ Χ”Χ’Χ¦ΧžΧΧ•Χͺ, וא׀שר גם ΧœΧ”ΧͺΧ¨Χ—Χ§ Χ’Χ“ Χ¨Χ—Χ•Χ‘ Χ¨Χ•Χ˜Χ©Χ™ΧœΧ“ Χ‘Χ—ΧœΧ§ Χ”Χ¦Χ€Χ•Χ Χ™ או Χ¨Χ—Χ•Χ‘ Χ”Χ§Χ•ΧžΧžΧ™Χ•Χͺ Χ‘Χ—ΧœΧ§ Χ”Χ“Χ¨Χ•ΧžΧ™.

    ΧœΧ€Χ Χ™ שאΧͺם ΧžΧ‘Χ–Χ‘Χ–Χ™Χ אΧͺ Χ–ΧžΧ Χ›Χ Χ‘Χ—Χ™Χ€Χ•Χ© אחר Χ’Χ™Χ‘Χ•Χ™ בבאר Χ©Χ‘Χ’, ΧͺΧ•Χ›ΧœΧ• Χ€Χ©Χ•Χ˜ ΧœΧ”Χ™Χ©ΧΧ¨
    Χ‘Χ€Χ•Χ¨Χ˜Χœ “ΧΧœΧ˜Χ¨Χ Χ˜Χ™Χ‘Χ™”! Χ›Χ“Χ™ ΧœΧ”Χ‘Χ™ΧŸ Χ•ΧœΧ—Χ•Χ•Χͺ אΧͺ Χ”Χ™ΧͺΧ¨Χ•Χ Χ•Χͺ Χ©Χ‘Χ’Χ™Χ‘Χ•Χ™, א׀שר
    ΧœΧ”Χ™Χ©ΧΧ¨ Χ§Χ¨Χ•Χ‘! Χ“Χ¨Χš ΧžΧ¦Χ•Χ™Χ Χͺ לצאΧͺ ΧžΧ”Χ©Χ’Χ¨Χ” Χ”Χ™Χ•ΧžΧ™Χ•ΧžΧ™Χͺ Χ©ΧœΧ›Χ Χ•ΧœΧ—Χ•Χ•Χͺ Χ—Χ•Χ•Χ™Χ” ΧΧ™Χ Χ˜Χ™ΧžΧ™ΧͺΧ¨Χ§ Χ©ΧœΧ›Χ.
    אנחנו לא צריכים לצאΧͺ ΧžΧ”Χ‘Χ™Χͺ, Χ•ΧœΧ”Χ™Χ›Χ Χ‘ ΧœΧžΧ§Χ•Χ אחר Χ•Χ‘Χ›Χš ΧœΧ”Χ‘ΧͺΧ›ΧŸ שיראו
    אוΧͺΧ Χ•. אז בגצם Χ‘Χ›Χœ Χ”ΧžΧ§Χ•ΧžΧ•Χͺ שאנחנו ΧžΧ€Χ’Χ™ΧœΧ™Χ ΧœΧ˜Χ™Χ€Χ•Χœ
    בנשים Χ‘Χ–Χ Χ•Χͺ Χ–Χ” Χ’Χ•Χ‘Χ“ ΧœΧ€Χ™ Χ”ΧžΧ•Χ“Χœ של “Χ§Χ• Χ¨ΧΧ©Χ•ΧŸ” Χ©Χ–Χ” Χ“Χ™Χ¨Χͺ חירום, שאישה Χ™Χ›Χ•ΧœΧ” ΧœΧ‘Χ•Χ ΧœΧœΧ™Χ Χ”, ΧœΧ”ΧͺΧ§ΧœΧ—, ΧœΧΧ›Χ•Χœ, ΧžΧ–Χ’Χ•Χ¨ נזקים, ΧœΧ”Χͺאושש, אנחנו ΧžΧ Χ‘Χ™Χ
    ΧœΧ”Χ¦Χ™Χ’ ΧœΧ” Χ˜Χ™Χ€Χ•Χœ Χ•ΧžΧ Χ‘Χ™Χ ΧœΧ’Χ•Χ¨Χ¨ ΧžΧ•Χ˜Χ™Χ‘Χ¦Χ™Χ” Χ›Χ™ Χ‘Χ“Χ¨Χš Χ›ΧœΧœ אנחנו
    לא דורשים ΧžΧžΧ Χ” לצאΧͺ ΧžΧ–Χ Χ•Χͺ Χ‘Χ©ΧœΧ‘
    Χ–Χ”, אנחנו Χ¨Χ§ רוצים ΧœΧžΧ–Χ’Χ¨ נזקים.
    Χ”ΧžΧ—Χ™Χ¨Χ™Χ משΧͺנים Χ‘Χ”Χͺאם ΧœΧžΧ˜Χ€ΧœΧ™Χ Χ•Χ Χ™Χͺן ΧœΧ‘Χ“Χ•Χ§ΧΧͺ Χ”ΧžΧ—Χ™Χ¨Χ™Χ של Χ›Χœ Χ˜Χ™Χ€Χ•Χœ Χ‘Χ§ΧœΧ•Χͺ גל Χ™Χ“Χ™ ΧœΧ—Χ™Χ¦Χ” גל Χ“Χ£ Χ”ΧžΧ˜Χ€Χœ.
    ΧžΧ“Χ•Χ‘Χ¨ גל ΧžΧ’Χ™ΧŸ “Χ›Χ¨Χ˜Χ™Χ‘Χ™Χ™Χͺ גיבויים Χ‘ΧΧ™ΧœΧͺ!” שאΧͺם רוכשים
    מראש, Χ›Χš Χ©ΧͺΧ•Χ›ΧœΧ• ΧœΧ§Χ‘Χ•Χ’ גם
    Χ”ΧžΧ’Χ‘Χ” מ׀גם ל׀גם Χ‘Χ”Χͺאם ΧœΧœΧ•Χ— Χ”Χ–ΧžΧ Χ™Χ Χ©ΧœΧ›Χ Χ•ΧœΧ¦Χ¨Χ›Χ™Χ
    Χ©ΧœΧ›Χ. ΧœΧ›ΧŸ, Χ€Χ’Χ™Χ©Χ•Χͺ Χ’Χ™Χ‘Χ•Χ™ ΧžΧ§Χ¦Χ•Χ’Χ™ Χ˜Χ™Χ€Χ•ΧœΧ™
    Χ™Χ›Χ•ΧœΧ•Χͺ ΧœΧ”ΧͺΧ‘Χ¦Χ’ Χ¨Χ§ גל Χ™Χ“Χ™ ΧžΧ•ΧžΧ—Χ” Χ‘Χ’Χœ Χ”Χ©Χ›ΧœΧ”
    ר׀ואיΧͺ Χ•Χ Χ™Χ‘Χ™Χ•ΧŸ Χ‘Χ‘ΧͺΧ™ Χ—Χ•ΧœΧ™Χ או Χ‘ΧžΧ¨Χ€ΧΧ•Χͺ.

    Χ›Χš או אחרΧͺ, Χ›Χœ Χ˜Χ™Χ€Χ•ΧœΧ™ Χ”Χ’Χ™Χ‘Χ•Χ™ מבΧͺΧ›ΧžΧ™Χ באוΧͺΧ• Χ”Χ“Χ‘Χ¨:
    ΧͺΧ€Χ’Χ•Χœ Χ˜Χ™Χ€Χ•ΧœΧ™ של Χ”Χ¨Χ§ΧžΧ•Χͺ Χ”Χ’Χ“Χ™Χ Χ•Χͺ של
    Χ”Χ’Χ•Χ£, ΧͺΧ•Χš Χ©Χ™ΧžΧ•Χ© Χ‘Χ‘Χ“Χ¨Χ” של ΧͺΧ Χ•Χ’Χ•Χͺ ΧœΧ—Χ₯.

    My web site – Χ“Χ™Χ¨Χ” Χ“Χ™Χ‘Χ§Χ¨Χ˜Χ™Χͺ Χ‘Χ Χ‘ Χ¦Χ™Χ•Χ Χ”

  3. Modesta

    Howdy! I know this is somewhat off-topic but I needed to ask.
    Does running a well-established website like yours require a large amount of
    work? I’m brand new to running a blog but I do write in my journal on a
    daily basis. I’d like to start a blog so I can easily share my experience and views
    online. Please let me know if you have any kind of suggestions or tips
    for brand new aspiring blog owners. Appreciate it!

  4. Marcelo

    I am regular visitor, how are you everybody?
    This paragraph posted at this web site is actually nice.

  5. Terrific article! This is the kind of info that are supposed to be shared across the net.
    Shame on the seek engines for no longer positioning this publish upper!
    Come on over and consult with my web site . Thank you =)

  6. Lavonda

    Asking questions are truly good thing if you are not understanding something fully, but this piece of writing
    presents nice understanding yet.

  7. aluminum machining services

    CNC machining of metal involves using a computer-controlled machine tool to remove material from a metal workpiece to create a desired shape or part. The process starts with designing a CAD model of the part that needs to be machined, and then programming the CNC machine with the necessary instructions to achieve this design.

    During the machining process, the CNC machine uses various cutting tools such as drills, mills, and lathes to remove material from the workpiece. The machine tool moves along multiple axes to accurately cut and shape the metal according to the programmed instructions. This results in highly precise and consistent parts being produced.

    cnc machining aerospace parts

  8. Sharyn Kauffman

    Ahaa, its fastidious discussion concerning this piece of writing here at this webpage,
    I have read all that, so at this time me also commenting
    here.

  9. user-475344

    awesome

Leave a Reply

Comment Your Experience